+90 212 294 54 18

OUR PAINTS

MAK SERIES

MAK

Code: MAK10

– Stir the paint for 3-4 min until it becomes homojeneous before application.

– It can be applied after waiting 15-20 minutes between coats.

– The  1.8 mm paint spray gun with a bottom feed is recommended.

– It can be applied high quality 1k varnish as a final coat and can be sanded finely.

– The application surface should be free from oil, dirt and dust.

– Protect from moisture and light.

– It is recommended to apply anti-rust before application to metal surfaces. 

MAK

Code: MAK11

– Stir the paint for 3-4 min until it becomes homojeneous before application.

– It can be applied after waiting 15-20 minutes between coats.

– The  1.8 mm paint spray gun with a bottom feed is recommended.

– It can be applied high quality 1k varnish as a final coat and can be sanded finely.

– The application surface should be free from oil, dirt and dust.

– Protect from moisture and light.

– It is recommended to apply anti-rust before application to metal surfaces. 

MAK

Code: MAK12

– Stir the paint for 3-4 min until it becomes homojeneous before application.

– It can be applied after waiting 15-20 minutes between coats.

– The  1.8 mm paint spray gun with a bottom feed is recommended.

– It can be applied high quality 1k varnish as a final coat and can be sanded finely.

– The application surface should be free from oil, dirt and dust.

– Protect from moisture and light.

– It is recommended to apply anti-rust before application to metal surfaces. 

MAK

Code: MAK13

– Stir the paint for 3-4 min until it becomes homojeneous before application.

– It can be applied after waiting 15-20 minutes between coats.

– The  1.8 mm paint spray gun with a bottom feed is recommended.

– It can be applied high quality 1k varnish as a final coat and can be sanded finely.

– The application surface should be free from oil, dirt and dust.

– Protect from moisture and light.

– It is recommended to apply anti-rust before application to metal surfaces. 

MAK

Code: MAK14

– Stir the paint for 3-4 min until it becomes homojeneous before application.

– It can be applied after waiting 15-20 minutes between coats.

– The  1.8 mm paint spray gun with a bottom feed is recommended.

– It can be applied high quality 1k varnish as a final coat and can be sanded finely.

– The application surface should be free from oil, dirt and dust.

– Protect from moisture and light.

– It is recommended to apply anti-rust before application to metal surfaces. 

MAK

Code: MAK15

– Stir the paint for 3-4 min until it becomes homojeneous before application.

– It can be applied after waiting 15-20 minutes between coats.

– The  1.8 mm paint spray gun with a bottom feed is recommended.

– It can be applied high quality 1k varnish as a final coat and can be sanded finely.

– The application surface should be free from oil, dirt and dust.

– Protect from moisture and light.

– It is recommended to apply anti-rust before application to metal surfaces. 

MAK

Code: MAK16

– Stir the paint for 3-4 min until it becomes homojeneous before application.

– It can be applied after waiting 15-20 minutes between coats.

– The  1.8 mm paint spray gun with a bottom feed is recommended.

– It can be applied high quality 1k varnish as a final coat and can be sanded finely.

– The application surface should be free from oil, dirt and dust.

– Protect from moisture and light.

– It is recommended to apply anti-rust before application to metal surfaces. 

MAK

Code: MAK20

– Stir the paint for 3-4 min until it becomes homojeneous before application.

– It can be applied after waiting 15-20 minutes between coats.

– The  1.8 mm paint spray gun with a bottom feed is recommended.

– It can be applied high quality 1k varnish as a final coat and can be sanded finely.

– The application surface should be free from oil, dirt and dust.

– Protect from moisture and light.

– It is recommended to apply anti-rust before application to metal surfaces. 

MAK

Code: MAK21

– Stir the paint for 3-4 min until it becomes homojeneous before application.

– It can be applied after waiting 15-20 minutes between coats.

– The  1.8 mm paint spray gun with a bottom feed is recommended.

– It can be applied high quality 1k varnish as a final coat and can be sanded finely.

– The application surface should be free from oil, dirt and dust.

– Protect from moisture and light.

– It is recommended to apply anti-rust before application to metal surfaces. 

MAK

Code: MAK22

– Stir the paint for 3-4 min until it becomes homojeneous before application.

– It can be applied after waiting 15-20 minutes between coats.

– The  1.8 mm paint spray gun with a bottom feed is recommended.

– It can be applied high quality 1k varnish as a final coat and can be sanded finely.

– The application surface should be free from oil, dirt and dust.

– Protect from moisture and light.

– It is recommended to apply anti-rust before application to metal surfaces. 

MAK

Code: MAK30

– Stir the paint for 3-4 min until it becomes homojeneous before application.

– It can be applied after waiting 15-20 minutes between coats.

– The  1.8 mm paint spray gun with a bottom feed is recommended.

– It can be applied high quality 1k varnish as a final coat and can be sanded finely.

– The application surface should be free from oil, dirt and dust.

– Protect from moisture and light.

– It is recommended to apply anti-rust before application to metal surfaces. 

MAK

Code: MAK31

– Stir the paint for 3-4 min until it becomes homojeneous before application.

– It can be applied after waiting 15-20 minutes between coats.

– The  1.8 mm paint spray gun with a bottom feed is recommended.

– It can be applied high quality 1k varnish as a final coat and can be sanded finely.

– The application surface should be free from oil, dirt and dust.

– Protect from moisture and light.

– It is recommended to apply anti-rust before application to metal surfaces. 

MAK

Code: MAK32

– Stir the paint for 3-4 min until it becomes homojeneous before application.

– It can be applied after waiting 15-20 minutes between coats.

– The  1.8 mm paint spray gun with a bottom feed is recommended.

– It can be applied high quality 1k varnish as a final coat and can be sanded finely.

– The application surface should be free from oil, dirt and dust.

– Protect from moisture and light.

– It is recommended to apply anti-rust before application to metal surfaces.