OUR PAINTS
PROMAK
PROMAK
Code: PRM1024
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM1023
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM1022
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM1018
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM1016
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM1014
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM1012
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM1010
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM1005
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM1000
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM2040
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM2035
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM2030
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM2025
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM2020
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM2015
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM2010
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM3015
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM3010
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.
PROMAK
Kod: PRM3005
– Stir the paint for 3-4 min until it becomes homojeneous before application.
– It can be applied after waiting 15-20 minutes between coats.
– The 1.8 mm paint spray gun with a bottom feed is recommended.
– It can be applied high quality 1k varnish as a final coat and can be sanded finely.
– The application surface should be free from oil, dirt and dust.
– Protect from moisture and light.
– It is recommended to apply anti-rust before application to metal surfaces.