Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the ninja-forms domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/mer1e7paintcom/public_html/wp-includes/functions.php on line 6114
lacbright/LC3060_eng
+90 212 294 54 18

Package Types

750 Ml

2,5 Kg

12 Kg

LC3060

Usage

After the application, top coat varnish can be applied. It provides a bright, shining appearance by forming a thin film layer on the applied surfaces. 

It is recommended to appliy anti-rust before application to metal surfaces. Stir the paint until it becomes homogeneous before application. The application surface should be free from oil, dirt and dust. Need to wait 5 min between each coating and apply with paint spay gun. The 1.8 mm paint spray gun with bottom feed is recommended. The first coat should be applied in low flow rate at distance of 35-40 cm. The second coat should be applied at close range and wait for 5 min. The third and fourth coat should be applied as a normal at close range as needed. 

Technical Information

Thinning : Ready to use (it can be thinned with high quality thinner when necessary).
Re-coat: 5 min.
Dry to touch: 15-20 min.
Full cure: 12 hours. 

Fields of Application

Wood
Poliurethan
Stone
Polyester
Metal